Enjoying the S-AIR receiver while the unit is in standby mode

For the S-AIR receiver

You can enjoy the S-AIR receiver while the unit is in standby mode by setting [S-AIR Standby] to [On].

1 Press "/1.

The system turns on.

2 Press HOME.

The home menu appears on the TV screen.

3 Press C/c to select [Setup].
4 Press X/x to select [System Settings], then press .
5 Press X/x to select [S-AIR Standby], then press .
6 Press X/x to select the desired setting.

•[On]: You can enjoy the S-AIR receiver while the unit is in standby mode or turned on.

•[Off]: You cannot enjoy the S-AIR receiver while the unit is in standby mode.

7 Press .

The setting is made.

•When you set [S-AIR Standby] to [On], the power consumption during the standby mode increases.

•When you turn the system off while [S-AIR Standby] is set to [On], “S-AIR” flashes (when sound transmission between the unit and S-AIR receiver is not established), or lights up (when sound transmission between the unit and S-AIR receiver is established) in the front panel display.

•If you turn the system off with the disc tray opened while [S-AIR Standby] is set to [On], the disc tray may not close automatically.

•When the wireless transceiver is not inserted in the unit, you cannot set the [S-AIR Standby].

•[S-AIR Standby] is set to [Off] automatically when the wireless transceiver is removed from the unit.

Using the surround amplifier for the surround back speakers

For the surround amplifier

When you use the additional surround amplifier (optional) with surround back speakers (optional), set the SURROUND SELECTOR switch to SURROUND BACK. For details about the surround back speakers, see “About the surround back speaker” (page 38).

Identifying the unit with a specific S-AIR sub unit (Pairing operation)

For the surround amplifier

For the S-AIR receiver

It is easy to set the same ID for the unit and an S-AIR sub unit, such as a surround amplifier or S-AIR receiver, to establish sound transmission. However, neighbors may also receive your system’s sound if IDs are the same, or you may receive the sound from neighbors. To prevent this, you can identify the unit with a specific S-AIR sub unit by performing the pairing operation.

xBefore pairing

Sound transmission is established by the ID (example).

Your room

Neighbor

This unit

ID A

ID A

ID A

S-AIR sub unit

S-AIR sub unit

102GB