[System Settings]
You can make the
x[OSD]
You can select your language for the system on- screen displays.
x[Dimmer]
You can adjust the lighting of the front panel display.
[Bright]: Bright lighting.
[Dark]: Low lighting.
x[Standby Mode]
You can shorten the startup time when turning the system on.
[Quick Start]: Shortens the startup time from standby mode. You can operate the system quickly after turning it on.
[Normal]: The default setting.
Note
•When [Standby Mode] is set to [Quick Start],
–power consumption will be higher than when [Standby Mode] is set to [Normal].
–the ventilation fan may turn on depending on the surrounding temperature.
x[Auto Display]
You can display information when switching audio modes or during playback.
[On]: Automatically displays information on the screen when changing the viewing titles, picture modes, audio signals, etc.
[Off]: Displays information only when you press DISPLAY.
x[Screen Saver]
The screen saver image appears when you do not use the system for more than 15 minutes while an
[On]: Turns on the screen saver function.
[Off]: Off.
x[S-AIR ID]
You can set the
x[S-AIR Pairing]
You can pair the system and
x[S-AIR Standby]
You can enjoy the
x[S-AIR RF Change]
You can improve the
x[Software Update Notification]
You can get information of newer software version. The information appears on the TV screen when you turn the system on. Network connections and settings are required when using this function (page 127).
[On]: Sets the system to inform you of newer software version information (page 118). [Off]: Off.
x[System Information]
You can display the system’s software version information and the MAC address.