5 Press X/x to select a setting, then press 
.
The setting is selected and setup is complete.
The options for the selected item appear. Example: [4:3]
Setup
TV Type | 4 : 3 |
Set the screen aspect ratio of your TV. |
|
Screen Format | Original |
DVD Aspect Ratio | Letter Box |
Cinema Conversion Mode | Auto |
Selected setting
[Network Update]
You can update and improve the functions of the system.
For information about update functions, refer to the following website; http://www.sony.net/
1 Press X/x to select [Network Update], then press 
.
The unit connects to the network, and the display asks for confirmation.
2 Press C/c to select [OK], then press
.
The unit starts downloading, then updating the software automatically.
When updating finishes, “COMPLETE!” appears for 5 seconds in the front panel display, then the system automatically turns off.
3 Press "/1 to turn the system on.
The system starts up with the updated software.
Note
•Do not disconnect the AC power cord (mains lead) or network cable while downloading or updating software.
•Any operations, including opening the disc tray, are not available while updating.
•Downloading times may differ depending on the server provider or line status.
•When error messages on network connections appear, check the network connections using [Network Diagnostic] of [Internet Settings] in [Network Settings] (page 127).
Tip
•The “UPDATE */9” counter (“*” indicates update step) in the front panel display also shows progress of the update.
•You can check the current software version by selecting [System Information] in [System Settings] (page 126).
•The [Setup] settings remain after updating.
•The system informs you of newer software version information when [Software Update Notification] is set to [On] (default) (page 126).