x[BD-ROM 1080/24p Output]
You can set to output 1920 × 1080p/24 Hz video signals when playing
1920 × 1080p/24 Hz video signals can be output when all of the following conditions are met.
–You connect a
–[Output Video Format] is set to [HDMI], and
–[HDMI Resolution] is set to [Auto] or [1080p].
The 24P indicator lights up when outputting 1920 × 1080p/24 Hz video signals.
[Auto]: Outputs 1920 × 1080p/24 Hz video signals only when connecting a 1080/24p- compatible TV using the HDMI OUT jack. [On]: Outputs 1920 × 1080p/24 Hz video signals regardless of the connected TV type. [Off]: Select this when your TV is not compatible with 1080/24p video signals.
Note
•Video signals may not be output when
x[YCbCr/RGB]
You can set the color setting for video signals output from the HDMI OUT jack. Select the setting that matches the connected TV type.
[Auto]: Automatically detects the type of external device, and switches to the matching color setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video signals.
[RGB
x[x.v.Colour Output]
Sets whether to send xvYCC information to the connected TV.
Combining
[Auto]: Normally select this.
[Off]: Select this when the picture is unstable or colors appear unnatural.
x[Audio (HDMI)]
You can set the output type for the audio signal from the HDMI OUT jack.
[AMP]: HDMI audio signals are output to the system speakers only. The
[TV+AMP]: HDMI audio signals are output from the TV’s speaker and the system’s speakers.
Note
•If you set to [TV+AMP], the sound quality of the system depends on the TV's sound quality, such as the number of channels, the sampling frequency, etc. When the TV has stereo speakers, the sound output from the system’s speakers is also stereo as that of the TV, even if you play
•When you connect the system to a video component (projector, etc.), sound may not be output from the system. In this case, select [AMP].
•When the System Audio Control function (page 107) is activated, this setting may change automatically.
Adjustments and Settings