Picture

Symptom

Remedy

There is no picture.

• The video connecting cords are not connected securely.

 

• The video connecting cords are damaged.

 

• The unit is not connected to the correct TV input jack (page 57).

 

• The video input on the TV is not set so that you can view pictures from the

 

system.

 

• Check the output method on your system (page 57).

 

• Re-connect the connecting cord securely.

 

• The unit is connected to an input device that is not HDCP (High-bandwidth

 

Digital Content Protection) compliant (“HDMI” on the front panel does not

 

light up) (page 57).

 

• When playing a double-layer DVD, the video and audio may be momentarily

 

interrupted at the point where the layers switch.

 

 

No picture appears when the

• Press and hold H and A on the unit for more than 5 seconds to reset the video

video output resolution selected

output resolution to the lowest resolution.

in [Output Video Format] is

 

incorrect.

 

 

 

Video signals are not output

• Set [Output Video Format] to [Component Video] in [Video Settings]

from the jacks, other than from

(page 119).

the HDMI OUT jack, when

 

connecting the HDMI OUT jack

 

and other video output jacks at

 

the same time.

 

 

 

The dark area of the picture is too

• Set [Picture Quality Mode] to [Standard] (default) (page 81).

dark/the bright area is too bright

 

or unnatural.

 

 

 

The picture is not output

• Check the [Output Video Format] settings in [Video Settings] (page 119).

correctly.

 

 

 

Picture noise appears.

• The disc is dirty or flawed.

 

• If the picture output from your system goes through your VCR to get to your

 

TV, the copy-protection signal applied to some BD/DVD programs could affect

 

picture quality. If you still experience problems even when you connect your

 

unit directly to your TV, try connecting your unit to the other input jacks

 

(page 57).

 

 

Even though you set the aspect

• The aspect ratio on the disc is fixed.

ratio in [TV Type] of [Video

 

Settings], the picture does not fill

 

the TV screen.

 

 

 

Color irregularity occurs on the

• If the speakers are used with a CRT-based TV or projector, install the speakers

TV screen.

at least 0.3 meters (1.0 ft) from the TV set.

 

• If the color irregularity persists, turn off the TV set once, then turn it on after 15

 

to 30 minutes.

 

• If howling occurs, reposition the speakers farther away from the TV set.

 

• Make sure that no magnetic object (magnetic latch on a TV stand, health care

 

device, toy, etc.) is placed near the speakers.

 

 

Information Additional

133GB