Tip

•To confirm the current ID, perform Steps 1 to 6 above. When you pair the unit with the S-AIR sub unit (page 102), [(Pairing)] appears beside ID on the display for selecting ID.

To set the ID of the surround amplifier

1 Make sure that the SURROUND SELECTOR switch of the surround amplifier is set to SURROUND.

2 Set the S-AIR ID switch of the surround amplifier to match the ID (A, B, or C) of the unit.

3 Press POWER on the surround amplifier.

When sound transmission is established, the POWER / ON LINE indicator of the surround amplifier turns green.

For details of the POWER / ON LINE indicator, see “To check the transmission status” (page 67).

Tip

•When you use the additional surround amplifier (optional) with the surround back speakers (optional), set the SURROUND SELECTOR switch to SURROUND BACK.

To set the ID of the S-AIR receiver

Refer to the operating instructions of the S-AIR receiver.

To use multiple S-AIR main units

You can use multiple S-AIR main units by setting a different ID for each component.

S-AIR main unit

(This unit)Other S-AIRmain unit

ID A

ID B

ID A

ID A

ID B

S-AIR sub unit

S-AIR

S-AIR sub unit

 

sub unit

 

100GB