Getting Started
Step 1: Assembling the Speakers
You can set speakers in two ways using stands: if you would like to place them on a floor, use speaker stands (page 23) and if on a desk, shelf, etc., use desktop stands (page 31).
Before connecting the speakers, assemble the speakers.
Caution on using the speakers
•When moving the speakers, keep one hand under the desktop stand and hold both sides of the speaker. When you use speaker stands with the speakers, hold the pole and the base.
• The following actions may damage the speaker.
Toppling the | Shaking the | Swinging the | Pushing on the | Hitting the speaker. | |||||||||
speaker. | speaker. | speaker. | speaker. |
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Speaker assembly
Use the parts as follows:
•Front speakers (2)
•Surround speakers (2)
•Center speaker (1)
•Speaker cords (5, white/red/blue/gray/green)
•Baffle covers (short 3, long 2)
•Grilles (5)
Use the following if you use speaker stands:
•Floor bases (4)
•Poles (4)
•Long screws (8, black)
Use the following if you use desktop stands:
• Desktop stands (4) *
* Desktop stands are screwed on the floor bases. When using desktop stands, unscrew and detach them.
Although the front part of the front speaker is slightly different from that of the surround speaker, the assembly method is the same.