Recording
Recording 23
Recording for a longer time

To record for a longer time

In the (TAPE SET) menu, select [REC
MODE], then [LP] (p.52).
In the LP mode, you can record longer than
when recording in the SP mode (2 times longer
for TRV138/338, 1.5 times longer for
TRV280).
A tape recorded in the LP mode should be
played back only on this camcorder.
Using zoom
When the CAMERA mode is selected, you
can choose zoom to magnification levels
greater than 20 times, and from that point
activate the digital zoom ([D ZOOM], p.45).
Occasional use of the zoom is effective, but
use it sparingly for best results.
Move the power zoom lever slightly for a
slower zoom. Move it further for a faster
zoom.
To record wider range of view
Move the power zoom lever towards W.
The subject appears farther away (Wide
angle).
To record closer view
Move the power zoom lever towards T.
The subject appears closer (Telephoto).

To use the zoom buttons on LCD frame

Keep W pressed to record wider range of view,
and keep T pressed to record closer view.
bNotes
• You cannot change the zoom speed with the zoom
buttons on LCD frame.
• To press the zoom buttons on LCD frame, support
the LCD panel with your hand.
Using the built-in light
You can use the built-in light to suit your
shooting situation. The recommended
distance between the subject and camcorder
is about 1.5 m (5 feet).
Press LIGHT repeatedly to select a setting.
The settings are displayed cyclically in the
following order.
No indicator displayed: Always records
without using the built-in light.
m
*The minimum distan ce required between your
camcorder and the subject to get a sharp focus in
that position of the lever.
1 cm (approx.
1/2 inch)*
80 cm
(approx.
2 5/8 feet)*
LIGHT
Built-in light
,continued