Getting started
Getting started
13
6Slide the POWER switch up to (CHG)
OFF.
The CHG (charge) lamp lights up and
charging starts.
After charging the battery
The CHG (charge) lamp turns off when the
battery is fully charged. Disconnect the AC
Adaptor from the DC IN jack.
To remove the battery pack
1Lift up the viewfinder.
2Set the POWER switch to (CHG) OFF.
3Slide the battery pack out in the direction
of the arrow while pressing the BATT
(battery) release button down.
bNote
• If you do not use the battery pack for a long time, use
up the battery pack completely before storing it. See
page96 about storage of the battery pack.
To check the remaining battery – Battery
Info
You can check the battery's current charge level
and its current remaining recording time both
during charging or when the power is turned of f.
1Set the POWER switch to (CHG) OFF.
2Press OPEN and open the LCD panel.
3Press DISPLAY/BATT INFO.
The battery information appears for about 7
seconds.
Keep the button pressed to view it for about
20 seconds.
ABattery charge level: Displays
approximate remaining amount of
power left in the battery pack.
BApproximate possible recording time
using the LCD panel.
CApproximate possible recording time
using the viewfinder.
Charging time
Approximate number of minutes required when
you fully charge a fully discharged battery pack
BATT (battery)
release button
POWER switch
POWER switch
OPEN
DISPLAY/BATT INFO
BATTERY INFO
BATTERY CHARGE LEVEL
REC TIME AVAILABLE
0% 50% 100%
LCD SCREEN: 81 min
VIEWFINDER: 112 min
,continued