Sony CCD-TRV338 Creating a DVD (Direct Access to Click to DVD)

Using with your computer
Using with your computer 79
• iMac, iBook, Macintosh, Mac OS ,
PowerBook and PowerMac are trademarks of
Apple Computer, Inc., registered in the U.S.
and other countries.
• eMac is a trademark of Apple Computer, Inc.
• QuickTime and the QuickTime logo are
trademarks of Apple Computer, Inc.
• Roxio is a registered trademark of Roxio, Inc.
• Toast is a trademark of Roxio, Inc.
• Macromedia and Macromedia Flash Player
are trademarks or registered trademarks of
Macromedia, Inc. in the United States and/or
other countries.
• Pentium is a trademark or registered
trademark of Intel Corporation.
All other product names mentioned herein may
be the trademarks or registered trademarks of
their respective companies. Furthermore, “™”
and “®” are not mentioned in each case in this
manual.
Creating a DVD
(Direct Access to
“Click to DVD”)
(TRV280)
bNote
• You can only use an i.LINK cable for this operation.
You cannot use a USB cable.
You can create DVDs when you connect your
camcorder to a Sony VAIO series computer*
that supports “Click to DVD” via an i.LINK
cable (optional). The picture is automatically
copied and written to a DVD.
* Note that you need a Sony VAIO computer
equipped with a DVD drive that can be used to
write DVDs. You also need the computer with
“Click to DVD Ver.1.2” (Sony original software) or
later installed.
The following procedures describe how to
create a DVD from a picture recorded on a tape.
For system and operation requirements, visit the
following URL:
to i.LINK (IEEE1394)
connector
i.LINK cable
(optional)
to DV
Interface
BURN DVD/VCD
,continued