Sony CCD-TRV338 To end Digital program editing, To save a program without using it to record

To end Digital program editing

Press MENU.

To save a program without using it to record

Press MENU in step 11.

The program is stored in memory until the cassette is ejected.

To erase programs

1Follow steps 1 to 4 in “Recording the selected scenes as programs” (p. 69).

2Turn the SEL/PUSH EXEC dial to select [UNDO] or [ERASE ALL], then press the dial.

When you select [UNDO]

You can erase the last set program.

When you select [ERASE ALL]

You can erase all the programs.

3Turn the SEL/PUSH EXEC dial to select [EXECUTE], then press the dial.

The programs are deleted. To cancel this operation, select [RETURN], and then press the dial.

bNotes

•You cannot set starting point or ending point on a blank section of the tape. If there is a blank section, the total time may not appear correctly.

•When you cannot operate the device correctly using an i.LINK cable connection, select [IR] in step 9 on p. 68, and set the [IR SETUP] code.

Dubbing/Editing

Dubbing/Editing

71