Using with your computer
Using with your computer 81

WRITING: The picture is being written

onto the DVD.

zTip
• If you use a DVD-RW/+RW which has other
data stored on it, the message [This is a
recorded disc. Delete and overwrite?] appears
on the LCD screen of your camcorder. When
you press the SEL/PUSH EXEC dial, the
existing data is erased and new data is written.
9Press BURN DVD/VCD to finish

creating a DVD.

The disc tray comes out automatically.

To create another DVD with the same

content, press the SEL/PUSH EXEC dial.

The disc tray comes out. Place a new

writable DVD in the disc drive. Then,

repeat steps 8 and 9.

To cancel the operation

Press BURN DVD/VCD.

bNotes
• You cannot cancel the operation after [Finalizing
DVD.] is displayed on the LCD screen of your
camcorder.
• Do not disconnect the i.LINK cab le or set the
POWER switch to another mode on your camcorder
until the picture is completely copied to the
computer.
• The DVD is created even if you disconnect the
i.LINK cable (optional) or turn off the power of your
camcorder while [WRITING] or [CONVERTING]
is displayed.
• When any of the following occurs, copying of the
picture is canceled. A DVD containing the data up to
the point the operation was canceled is created.
Refer to the help files of “Click to DVD Automatic
Mode Launcher” for details.
–When there is a blank portion of 10 secon ds or
longer on the tape.
–When the data of the tape contains a date before
the recording date of the later images.
–When normal and wide size pictures are recorded
on the same tape.
• You cannot operate your camcorder in the following
situations:
–While playing back a tape
–When “Click to DVD” is started up from the
computer
• You may not be able to create a DVD from an 8mm
tape if it contains pictures recorded in a format other
than Digital8 format.
BURN DVD
COMPLETED
0:00:00:00
Create another
copy?
Disctray
opens.
[EXEC] :EXECUTE
[BURN DVD/VCD] : CANCEL
60min