Other Functions
Setting the Player to Turn Off Automatically
(Power Save Function) Z
When the Power Save function is on, the player will automatically turn off (change to STANDBY) after several minutes of inactivity.
1/u
1 2 3
4 5 6
7 8 9
>10 | 10 /0 |
(P p
=/+ 
= + 0 )
MENU/NO 
YES
1Before playing a disc, press MENU/NO repeatedly until “Setup Menu” appears in the display.
2Press =/+until “Power Save” appears, then press YES.
3Press =/+to select the setting, then press YES.
To | Select |
Turn on the Power Save | Power Save On |
function | (default setting) |
|
|
Turn off the Power Save | Power Save Off |
function |
|
|
|
4Press MENU/NO.
About i.LINK
This section explains the general specifications and major features of i.LINK. Read this section before doing any
Note that i.LINK connections and operations may vary, depending on the component. For details regarding the connection of i.LINK components to this player, see “Hooking Up the System” on page 4.
i.LINK functions
i.LINK is a serial digital interface that supports the bidirectional transmission of audio and video signals, commands, and even component status information. All that is needed to hook up i.LINK components are i.LINK connecting cables. Audio and video components connected within an i.LINK configuration can be used to perform a wide range of operations and data exchanges that is sure to expand as the number and variety of i.LINK components grow.
Since i.LINK allows data to be transmitted from one component to other components to which it is not directly connected, there is no need to pay attention to connection order. However, due to differences in characteristics or specifications, operation of or data exchange with certain i.LINK components may not be possible, even when they are connected.
zWhat is i.LINK?
i.LINK is a trademark proposed by Sony Corporation and accepted by companies throughout the world as an