Additional Information
Specifications
Compact disc player
Laser | Semiconductor laser (λ = 800 nm) |
| Emission duration: continuous |
Inputs/Outputs (i.LINK S200) | |
i.LINK connector | 4 pins - 4 pins (S200) |
General
Power requirements | 230 V AC, 50/60 Hz |
Power consumption | 22 W |
Dimensions (approx.) (w/h/d) | 430 × 70 × 315 mm |
| |
| incl. projecting parts |
Mass (approx.) | 4.6 kg |
Supplied accessories
i.LINK connecting calbe (4 pins - 4 pins) (1) Remote commander (remote) (1)
Design and specifications are subject to change without notice.
Display Messages
The following table explains the various messages that appear in the display.
Message | Error code(s) | Cause and/or remedy |
CANNOT | C78:11/C78:12 | The player cannot establish |
LINC |
| a LINC with a component |
|
| because of an existing LINC |
|
| between the player and |
|
| another component. Cancel |
|
| the LINC between the |
|
| player and the other |
|
| component. |
|
|
|
BUS FULL | C78:15 | The signal bus within the |
|
| i.LINK configuration is full |
|
| and no more signals can be |
|
| output from the player. |
|
| Cancel the LINC between |
|
| the component and the |
|
| player. |
|
|
|
LOOP | C78:03 | The i.LINK connection is |
CONNECT |
| looped. Check the |
|
| connection (see page 17). |
|
|
|
NEW | — | An i.LINK component has |
CONNECT |
| been connected to or |
|
| disconnected from the |
|
| i.LINK configuration. Wait |
|
| several seconds for the |
|
| indication to turn off. |
|
|
|