Getting Started

Unpacking

Check that you have received the following items:

•i.LINK connecting cable (1)

•Remote commander (remote) (1)

Before using the supplied remote

The supplied remote already contains a battery. Before using the remote, pull out the insulating sheet to allow the power to flow from the battery.

To avoid battery leakage

If you don’t use the remote for an extended period of time, remove the battery to avoid possible damage from battery leakage and corrosion.

zWhen to replace the battery

Under normal conditions, the battery should last for about six months. When the remote no longer operates the player, replace the battery with a new one.

Notes on lithium battery

•Keep the lithium battery out of the reach of the children. Should the battery be swallowed, immediately consult a doctor.

•Wipe the battery with a dry cloth to assure a good contact.

•Be sure to observe the correct polarity when inserting the battery.

•Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur.

WARNING

Battery may explode if mistreated.

Do not recharge, disassemble, or dispose of in fire.

Hooking Up the System

Overview

This section describes how to hook up the CD player to a receiver or other components such as an MD deck. Be sure to turn off the power to all components before you start connecting them.

CDP-LSA1

v

v

 

￿￿

￿￿

b

 

 

 

 

To a mains

i.LINK

 

i.LINK

S200

 

S200

Receiver*

MD deck, etc.*

ç￿: Signal flow

*You can connect components to either i.LINK S200 connector.

What cords will I need?

i.LINK connecting cable (supplied) (1)

4GB