1 Press TUNER/BAND repeatedly until the band you want appears.

Each time you press the button, the band changes as follows:

FM yAM

AUTO

 

TUNED STEREO

MHz

2 Press TUNING MODE repeatedly until “PRESET” appears.

PRESET

 

TUNED STEREO

MHz

3 Press l/Lto select the desired station’s preset number.

 

PRESET

 

 

TUNED STEREO

MHz

 

 

 

 

To

Do this

Turn off the radio

Press "/1 to turn off the

 

 

system.

 

 

Adjust the volume

Press VOL +/–.

 

 

 

To listen to non-preset radio stations

Press TUNING MODE repeatedly until “MANUAL” appears in step 2, then press

+/– (or TUNING +/– on the unit) repeatedly to tune in the desired station (Manual Tuning).

Press TUNING MODE repeatedly until “AUTO” appears in step 2, then press +/– (or TUNING +/– on the unit). The frequency indication changes and scanning stops when the system tunes in a station (Automatic Tuning).

To cancel the Automatic Tuning

Press TUNING MODE.

Tips

You can switch from another source to the tuner by pressing TUNER/BAND (Automatic Source Selection).

If you press TUNER/BAND while the power is off, the power turns on and the system tunes in the last received station automatically (One Touch play).

To improve broadcast reception, reorient the supplied antennas or connect an optional external antenna.

When an FM program has static noise, press STEREO/MONO until “MONO” appears. There will be no stereo effect, but the reception will improve. Press again to restore the stereo effect.

Operations Basic

11