Step 2: Setting the time

You must set the time before you can use the timer functions.

The clock is on a 24-hour system for the European model, and a 12-hour system for other models.

The 24-hour system model is used for illustration purpose.

Set the time before turning the power on.

DISPLAY

2,3,4

1 2,3,4

1 Press TIMER SET while the power is off.

The day indication flashes after “CLOCK SET” flashing.

2 Press +/– to set the day then press

ENTER.

The hour indication flashes.

3 Press +/– to set the hour then press

ENTER.

The minute indication flashes.

4 Press +/– to set the minute then press

ENTER.

The clock starts.

To change the time

You can change the preset time while the power is on.

1Press TIMER SET.

2Press +/– repeatedly until “CLOCK SET” appears then press ENTER.

3Repeat steps 2 to 4.

To show the time

You can display the clock any time.

Press DISPLAY repeatedly until the clock display appears.

Tips

•If you have made a mistake, start over from step 1.

•The built-in clock shows the time in the display while the power is off.

•The upper dot flashes for the first half of a minute (0 to 29 seconds), and the lower dot flashes for the last half of a minute (30 to 59 seconds).

6