![](/images/backgrounds/18922/18922-287x1.png)
Step 3: Presetting radio |
| 5 Press MEMORY. |
stations |
| A preset number flashes. |
| Proceed to step 6 while the preset number is | |
|
| flashing. If the unit is not operated for more |
You can preset the following number of stations: |
| than 16 seconds, the preset number |
| disappears and the unit returns to the status | |
– 20 for FM, 10 for AM. |
| |
| of step 3. If this happens, start over from | |
|
| |
|
| step 4. |
| 1 |
2 | 4,6 |
3,4 | 5 |
| 6 |
1 Press ?/1 to turn on the system.
2 Press TUNER/BAND repeatedly until the band you want appears in the display.
Each time you press the button, the band changes as follows:
FM y AM
3 Press TUNING MODE repeatedly until “AUTO” appears.
4 Press +/– (or TUNING +/– on the unit).
The frequency indication changes and scanning stops when the system tunes in a station. “TUNED” and “STEREO” (for a stereo program) appear. When you want to stop scanning, press TUNING MODE.
6 Press +/– to select the preset number you want then press ENTER.
The station is stored.
Select 1 to 20 for FM, and select 1 to 10 for AM.
7 Repeat steps 2 to 6 to preset other stations.
To tune in the station manually1Press TUNING MODE repeatedly until “MANUAL” appears in step 3.
2Press +/– (or TUNING +/– on the unit) repeatedly to tune in the station and continue from step 5.
To change the preset numberStart over from step 2.
continued7