Programing the CD
tracks –– Program Play
You can make a program up to 24 tracks in the order you want them to be played.
5 s
1 3
2
3
1Press FUNCTION repeatedly until “CD” appears.
2Press CD PLAY MODE repeatedly until “PGM” appears.
3Press l/Luntil the desired track number appears, then press ENTER.
4To program additional tracks, repeat step 3.
Each time you program, the total time of the program and the last selected track number are displayed. You can make a program up to 24 tracks.
5 Press CD H.
All the tracks play in the order you selected.
To cancel Program PlayPress CD PLAY MODE repeatedly until “PGM” and “SHUF” disappear from the display.
To change the programYou can change the program before you start playback.
To | Do this |
Clear the entire | Do steps 1 and 2, then |
program | press s in stop mode. |
|
|
Add a track to the | Do step 3. |
program |
|
|
|
Tips
•The program you made remains after Program Play finishes. To play the same program again, press CD H.
•When the total playing time has exceeded
100 minutes, the time is not displayed and the total number of programed tracks is displayed.
•If you try to add more than the maximum number of tracks possible, “STEP FULL” appears.
13