Connecting headphones
Connect headphones to the PHONES jack.
PHONES jack
Listening to the sound of connected components
| ?/1 (Power) |
|
| 2 |
|
|
| Optional |
1 | Prepare the audio components. | Components |
| ||
2 | Press FUNCTION repeatedly until |
|
| “TAPE” appears. |
|
Each time you press the button, the function display changes as follows:
tTUNER t TAPE t CD
To attenuate the distortion from the connected componentsYou can change the audio input level for the TAPE input jacks between two levels.
If the sound from a connected component is distorted, reduce the input level.
1Press FUNCTION repeatedly until “TAPE” appears.
2Press ?/1to turn off the system.
3While holding down x on the unit, press ?/1 on the unit to turn on the system.
“ATT ON” appears in the display.
When the volume is too low, do steps 1 to 3 again to reset to the original level.
21