3Connect the AM antenna.
Set up the AM loop antenna, then connect it. Connect the white cord to the U terminal, and the red cord to the other terminal.
AM loop antenna
NoteKeep the antenna away from the speaker cords to prevent noise.
4Reinstall the rear cover.
Put the wires through the hole at the bottom of the rear cover.
5Connect the AC power cord to a wall outlet after you complete all the connections.
The CD player cover is made of tempered glass. Under normal conditions, this tempered glass is more shock resistant and able to bear more weight than ordinary glass. This glass, however, may shatter if it receives a sharp blow or if it is scratched.
To level the speakersAttach the supplied speaker legs to the rear of the speaker bottoms to level the speakers.
Inserting two R6 (size AA) batteries into the remotee
E E
e
TipWith normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage.
To connect optional componentSee “Optional Components” on page 20.
5