Specifications
Amplifier sectionFor the U.S. modelAUDIO POWER SPECIFICATIONSPOWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 4 ohm loads both channels driven, from 70 – 20,000 Hz; rated 10 watts per channel minimum RMS power, with no more than 0.9% total harmonic distortion from 250 milliwatts to rated output.
Canadian model:Continuous RMS power output (Reference) 15 + 15 watts
(4 ohms at 1 kHz, 10% THD)
European model: DIN power output (Rated)
12 + 12 watts
(4 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference) 15 + 15 watts
(4 ohms at 1 kHz, 10% THD)
Music power output (Reference)
15 + 15 watts
Other models:DIN power output (Rated)
12 + 12 watts
(4 ohms at 1 kHz, DIN, 240 V) 12 + 12 watts
(4 ohms at 1 kHz, DIN, 220 V)
Continuous RMS power output (Reference)
| 15 + 15 watts |
| (4 ohms at 1 kHz, 10% THD, |
| 240 V) |
| 15 + 15 watts |
| (4 ohms at 1 kHz, 10% THD, |
| 220 V) |
Inputs | TAPE IN: voltage 250 mV, |
| impedance 47 kilohms |
Outputs | TAPE OUT: voltage 250 mV, |
| impedance 1 kilohms |
| CD OUT: Optical |
| PHONES (stereo mini jack): |
| accepts headphones of 8 ohms or |
| more |
System | Compact disc and digital audio |
| system |
Laser | Semiconductor laser (λ=780 nm) |
| Emission duration: continuous |
Laser output | Max. 44.6 µW* |
| * This output is the value |
| measured at a distance of |
| 200 mm from the objective lens |
| surface on the Optical |
| Block with 7 mm aperture. |
Frequency response | 20 Hz – 20,000 Hz |
FM stereo, FM/AM superheterodyne tuner
FM tuner sectionTuning range | 87.5 | – 108.0 MHz |
| (50 kHz step) | |
Antenna | FM wire antenna | |
Antenna terminals | 75 ohms unbalanced | |
Intermediate frequency | 10.7 | MHz |
Tuning range |
|
European model: | 531 – 1,602 kHz |
| (with the interval set at 9 kHz) |
Other models: | 531 – 1,602 kHz |
| (with the interval set at 9 kHz) |
| 530 – 1,710 kHz |
| (with the interval set at 10 kHz) |
Antenna | AM loop antenna |
| External antenna terminals |
Intermediate frequency | 450 kHz |
26