![](/images/backgrounds/18922/18922-2819x1.png)
4 Press +/– repeatedly until “TIMER SET” appears then press ENTER.
The hour indication flashes.
5 Set the time to start playback.
Press +/– to set the hour, then press ENTER. The minute indication flashes.
Press +/– to set the minute, then press
ENTER.
The hour indication flashes again.
6 Set the time to stop playback following the procedure in step 5.
The music source indication flashes.
7 Press +/– repeatedly until the music source you want appears.
The indication changes as follows:
tTUNER y TAPE* T t CD PLAY T
If you press ENTER, the start time, followed by the stop time, the music source appears, then the original display appears. “DAILY” lights up in the display.
*Select “TAPE” to use an optional component connected to the TAPE jacks as the music source.
8 Press ?/1 to turn off the system.
The Daily Timer is set. At the selected time, the system turns on automatically and the assigned music source begins playback. When the time is over, the system turns off and resets the Daily Timer.
Start over from step 1.
To check the setting / To use the timerPress TIMER SELECT to indicate “DAILY”. The start time, followed by the stop time, the music source appears, then the original display appears.
To cancel the timerPress TIMER SELECT to indicate “TIMER OFF”.
Tip
To reset the Daily Timer with the same settings, press TIMER SELECT repeatedly until “DAILY” appears in the display and then turn off the system. It is not necessary to set the start and stop times every time.
Features Other
19