Getting Started
Step 1: Hooking up the system
Perform the following procedures 1to 5to hook up your system using the supplied cords and accessories.
The front cover is made of tempered glass. Please remember to handle this unit carefully.
AM loop antenna
Rear cover | Right speaker | Left speaker |
1 4
5
3
2
1 Remove the rear cover. | 2 Connect the speakers. |
Push in on the tabs and pull up the cover
Connect the speaker cords to the SPEAKER terminals as shown below.
Insert this portion
lined
clear
Notes
•Keep the speaker cords away from the antenna to prevent noise.
•Be sure to connect both left and right speakers. Otherwise, the sound will not be heard.
4