Messages

If a message appears while using the CPF- IX001, follow the procedures below to correct the problem.

Network

Cannot Play

•Start up M-crew Server Ver. 2.0 and click the [ERROR LOG] button in the LAUNCHER window, or right-click the M-crew Server task tray icon* and select “ERROR LOG VIEWER”, then check the error log.

•The track cannot be played in the following cases:–Sampling rate is other than 32 kHz, 44.1 kHz, 48 kHz.–The track is not being streamed by linear PCM.–The track is other than one channel or two channel.–The track sampling bits are other than 16 bits.–The server status is busy.Check Net

•Check that the network cable between the CPF- IX001 and the hub or router is firmly connected.

•Check that the hub or router is turned on.

•Set the wireless LAN router channel to any channel from CH1 to CH11. For details, refer to the operation manual of your wireless LAN router.

IP Conflict

•Set the IP addresses of the CPF-IX001 and other devices on the network so that there is no duplication (page 21).

No Item

•Register the track as instructed by the operation manual of the connected server.

•Follow the procedure below and reconnect to the server.

1.Press MENU.

2.Select “SERVER?” in the network menu (page 20), then press ENTER.

3.Press ./> repeatedly to select the desired media server, then press ENTER.

No Server/No response

•Restart the computer.

•Check the WIRELESS/WIRED selector on the network unit.

•Start up the server. M-crew Server Ver. 2.0 can be started up by the following method:

Right-click the M-crew Server task tray icon*, then click “Start Music Service” in the menu.

•M-crew Server Ver. 2.0 may not be recognizing the CPF-IX001. Follow the procedure below and check whether M-crew Server Ver. 2.0 is recognizing the CPF-IX001:

1.Click [Start] – [All Programs] – [M-crew Server] – [TOOLS] – [EQUIPMENT LIST] in that order.

2.If the CPF-IX001 is not present in the list that appears in step 1, device registration must be performed. For details, see the “M-crew Server Ver. 2.0” Help or “M-crew Server Ver. 2.0” Install manual within M-crew Server Ver. 2.0.

•When setting a firewall other than that provided with the OS, refer to Troubleshooting in the “M- crew Server Ver. 2.0” Install manual included on the supplied CD-ROM.

•Perform the TCP/IP settings and wireless settings correctly for the CPF-IX001 and the computer (page 21).

Press MENU

•Follow the procedure below and reconnect to the server.

1.Press MENU.

2.Select “SERVER?” in the network menu (page 20), then press ENTER.

3.Press ./> repeatedly to select the desired media server, then press ENTER.

Server Err

•Follow the procedure below and reconnect to the server.

1.Press MENU.

2.Select “SERVER?” in the network menu (page 20), then press ENTER.

3.Press ./> repeatedly to select the desired media server, then press ENTER.

Server Close

•Start up the server. M-crew Server Ver. 2.0 can be started up by the following method:

Right-click the M-crew Server task tray icon*, then click “Start Music Service” in the menu.

•When you want to change the computer’s network settings, restart the server on your computer. This message disappears after a short time.

continued

Troubleshooting

27GB