2:Installing the supplied M-crew Server Ver. 2.0 software

To enjoy listening to the music stored on your computer or listening to the web radio, you must first install the supplied M-crew Server Ver. 2.0 software.

The installation screen starts up automatically when you insert the supplied CD-ROM into the computer, so follow the instructions on the screen and install the software.

M-crew Server

Ver. 2.0 software

CD-ROM

For details on the installation, refer to the “M-crew Server Ver. 2.0” Install manual contained on the supplied CD-ROM.

Note for NAS-CZ1 users

Install M-crew Server Ver. 2.0 without uninstalling M-crew Server Ver. 1.0. The contents information can be used even after installing M-crew Server Ver. 2.0.

3: Preparing the remote
Pull out the insulating sheet to allow power

Getting

 

to flow from the battery.

 

The remote already contains a battery.Started

 

Replacing the battery in the remote1Slide out and remove the battery case.2Insert a new lithium battery CR2025 with the + side facing up.

A lithium battery CR2025

3Slide the battery case back in.

Note

If you do not use the remote for a long period of time, remove the battery to avoid possible damage from battery leakage and corrosion.

continued

9GB