The sound skips.

•Sound skipping may occur in the following cases:

–When music is being recorded onto the server

–When the computer is running many applications

–When the network status is crowded

–When multiple CPF-IX001 systems are performing playback simultaneously

•When the computer and the wireless LAN router are connected by a wireless connection, change it to a wired connection.

•When the wireless LAN router and the CPF- IX001 are connected by a wireless connection, position the CPF-IX001 as close to the wireless LAN router as possible.

Track names are not displayed.

•Some types of input characters cannot be displayed by the CPF-IX001, even if they can be registered and displayed on the server.

Operation commands take time.

•Depending on the condition of the server, it may take a while until operation proceeds. For example, when there is no response after pressing m/M, keep pressing m/M for a while. Afterwards, operation should begin.

Wireless connection does not work well.

•Check that the wireless settings (SSID, Security mode, Key) match the settings of your wireless LAN router.

•Check that your wireless LAN router uses the latest firmware version. If it is not the latest version, updating the firmware may improve the communication quality. For details, refer to the operation manual of your wireless LAN router.

Optional components

There is no sound.

•Refer to General items “There is no sound.” and check the condition of the CPF-IX001.

•Connect the portable audio player properly (page 24) while checking:

–if LINE IN cable connected properly.

–if LINE IN cable plug is firmly inserted all the way.

•Turn on the connected portable audio player.

•Refer to the operating instructions supplied with the connected portable audio player and start playing.

The sound is distorted.

•Set the volume of the connected portable audio player lower.

If the CPF-IX001 still does not operate properly after performing the above measures, reset the CPF-IX001 as follows:

1If the network unit is in the suspended mode, press SUSPEND to start it up.2If play starts, press x to stop play.

3Insert a fine-tipped object into the RESET hole on the side of the network unit and press in.

4The network unit restarts.

The CPF-IX001 is reset to the factory settings. You should set the settings you made.

26GB