Sony DAV-C450 manual TV and Video Component Hookups, 23GB, Required cords

Step 3: TV and Video Component Hookups

Required cords

Video cord for connecting a TV monitor

YellowYellow

Audio cords (not supplied)

When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the components.

White (L/audio)	White (L/audio)
Red (R/audio)	Red (R/audio)
Jacks for connecting video components
Connect a	To the
TV monitor	MONITOR OUT jack
VCR	AUDIO 1 jacks
Digital satellite receiver	AUDIO 2 jacks

zWhen using the S-VIDEO jack instead of the VIDEO jack

Your TV monitor must also be connected via an S-VIDEO jack. S-video signals are on a separate bus from the video signals and will not be output through the video jacks.

zWhen you are connecting the monitor, projector, or AV amplifier (receiver) having component video input jacks (Y, PB, CB, PR, CR)

Connect the component via the COMPONENT VIDEO OUT jacks using a component video cord (not supplied) or three video cords (not supplied) of the same kind and length. You will enjoy accurate color reproduction and high quality images.

Notes

•When you select AUDIO 1 using the FUNCTION button, the signal is output from the front L/R speakers, but not from the AUDIO 1 OUT L/R jacks.

•When you use the AUDIO 1 line outputs, please set the system to 2CH STEREO mode. If the system is not in 2CH STEREO mode, the line outputs may not function properly.

continued

Getting Started

23GB