Changing the SETUP display

Icon/item

Option

Meaning

Mode dial

OTHERS

 

 

 

REMAIN zAUTO

To display the remaining capacity of the disc in

 

the following cases for example:

•For 8 seconds after setting the power on and the mode dial to (Movie) or (Still)

•For 8 seconds after recognising the inserted

disc into your camcorder in (Movie) or (Still)

•For 8 seconds when set the display to on by

pressing DISPLAY/BATT INFO in (Movie) or (Still)

•When the remaining capacity of the disc is less than 5 minutes in (Movie) or 20 in (Still)

•For 8 seconds when starting recording from the line input

Movie

Still

Play/Edit

ON

To always display the remaining capacity of the

 

disc

Notes

•If you press DISPLAY/BATT INFO with [DISPLAY] set to [V-OUT/LCD] in the SETUP display, the picture from a TV or VCR will not appear on the LCD display even when your camcorder is connected to outputs on the TV or VCR.

•If more than 5 minutes passes after removing the power source, the [PROGRAM AE], [FLASH LVL], [WHT BAL], [COMMANDER], and [HiFi SOUND] settings are returned to their factory settings. Other settings are held in memory even when the battery is removed.

Tip

When recording a close subject, if [REC LAMP] is set to [ON], the red camera recording lamp on the front of the camcorder may reflect on the subject if it is close. In this case, it is recommended to set [REC LAMP] to [OFF].

Camcorder Your Customizing

115-GB