Connecting your camcorder to your computer – Introduction

If you cannot install the USB driver

The USB driver have been registered incorrectly as your computer was connected to your camcorder before the installation of the USB driver was completed. Perform the following procedure to install the USB driver correctly.

1Disconnect your camcorder from the computer following “To disconnect the USB cable” (page 96).

2Install the USB driver again following “Installing the USB driver” (page 90).

3Connect your camcorder to the computer following “Connecting your camcorder to the computer” (page 92). The USB driver installation and the connection between your camcorder and the computer is completed.

Consulting the on-line help (operating instructions) ofImageMixer Ver.1.5 for Sony DVD Handycam

An ImageMixer Ver.1.5 for Sony DVD Handycam on-line help is available where you can find detailed operating instructions for ImageMixer software.

1 Click located at the top right of the screen.

Or, click [Start] t [Programs] ([All Programs] in Windows XP) t [PIXELA] t [ImageMixer] t [Help]. The ImageMixer Help screen appears.

2 Find the information you need from the table of contents.

Viewing/dubbing

To close the on-line help

Click the button at the top right of the screen.

If you have any questions about ImageMixer Ver.1.5 for Sony DVD Handycam

ImageMixer Ver.1.5 for Sony DVD Handycam is the product of PIXELA corporation. For details, refer to the operating instructions of the CD-ROM supplied with your camcorder.

computer your on recordings the editing discs/

97-GB