Connecting your camcorder to your computer – Introduction
Notes on using your computer

Software

Depending on your application software, the file size may increase when you open a still image file.

Communications with your computer

Communications between your camcorder and your computer may not recover properly even after your computer recovers from Suspend/ Resume, or from Sleep status.

Installing the USB driver

Start the following operation before connecting the USB cable to your computer.

Install the USB driver to control your camcorder from your computer.

If you are using Windows 2000 Professional or Windows XP Home Edition/Professional, log in as administrator.

1 Turn on your computer and allow Windows to load.

When your computer is already turned on, close all the software.

2 Insert the supplied CD-ROM into the CD-ROM drive of your computer. The installation menu screen appears.

If the menu screen does not appear, double-click [My Computer], then [ImageMixer] (CD-ROM Drive). The menu screen appears after a while.

90-GB