Connecting your camcorder to your computer – Introduction
For Microsoft Windows 2000 Professional users
1 Connect the AC adaptor to your camcorder.
2 Set the mode dial to 
(Play/Edit).
3 Turn the power on your camcorder by sliding the POWER switch upward while pressing the green button.
4 Connect the 
(USB) jacks of the camcorder and the 
(USB) port of the computer using the USB cable supplied with your camcorder.
USB port
USB cable
USB jack
To disconnect the USB cable
See “To disconnect the USB cable” (page 96).
Your computer recognises the camcorder, and the “Found New Hardware” dialog box appears.
5 Follow the instructions given in the on- screen messages.
The connection between your camcorder and the computer is completed.