Identifying parts and controls
To prepare the Remote Commander
Remove the insulation sheet as illustrated to activate the Remote Commander.
To replace the
Insert CR2025 lithium battery by matching the + and – on the battery to the + and – terminals in the battery compartment.
1 | 2 | 3 |
WARNING
Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.
Notes
On the Remote Commander
•The
•Point the remote sensor away from strong light sources such as direct sunlight or overhead lighting. Otherwise, the Remote Commander may not function properly.
•Your camcorder works in the DVD 2 Commander mode. Commander modes
1, 2 and 3 are used to distinguish your camcorder from other Sony DVD players to avoid erroneous remote control operation. If you use another Sony DVD player in the DVD 2 Commander mode, it is recommended that you change the Commander mode of the DVD player or cover the sensor of the DVD player with black paper.
controls/Index and Parts
143