Open the LCD screen.

Step 4 Setting the date and time

Set the date and time when you use your camcorder for the first time. Set the geographical area, then daylight savings time([DST]), the year, the month, the day, the hour and the minute, in that order. If you do not set the date and time, the [CLOCK SET] display appears whenever you turn on your camcorder or change the mode dial. If you do not use your camcorder for about 3 months, the date and time settings may be cleared from memory because the built-in rechargeable battery in your camcorder will have been discharged during that time. In that case, charge the built-in rechargeable battery by connecting the AC adaptor, and set the date and time again (page 16, 134).

FARNEAR

 

Multi-selector:

 

Select with V/v/B/b and

 

press the button in the

SETUP button

center to confirm your

selection.

 

Started Getting

1

2 Turn the power on by pressing the POWER button for a few seconds. The CLOCK SET display appears.

CLOCK SET

AREA 26 GMT -5.0

New York,Bogota

DST OFF

DATE Y M D

:

[ ENTER ] : NEXT ITEM

3 Use the multi-selector to select the desired geographical area.

CLOCK SET

AREA 26GMT -5.0

New York,Bogota

DST OFF ON

DATE Y M D

:

[ ENTER ] : NEXT ITEM

23