Shooting still images

Notes

•When the mode dial is set to (Still), the following functions do not work.

–16:9 Wide mode

–Digital zoom

–SteadyShot

–Super NightShot plus

–Color Slow Shutter

–Fader

–Picture effect

–Digital effect

–The Sports lesson feature of [PROGRAM AE] (The indicator flashes.)

•When the ACCESS lamp lights on, data is being recorded on the disc. Take note of the following when data is being recorded, or the data and the disc may be damaged.

–Do not shock or vibrate the camcorder.

–Do not turn the power off.

–Do not remove the battery pack or disconnect the AC adaptor.

–Do not open the disc cover.

•When you press PHOTO lightly in step 7, the image momentarily flickers. This is not a malfunction.

•You can neither turn off the power nor press PHOTO while CAPTURE appears on the LCD display.

•The writing time to the disc for recording may vary depending on the still image size.

Tips

•The amount of recording data may vary depending on the settings for image quality and image size, and the type of images you are shooting.

•The recording data (date/time or various settings in effect when shooting) are not displayed while recording. However, they are recorded automatically onto the disc. To display the recording data, press DATA CODE on the Remote Commander during playback (page 59).

•The angle of view for still images is slightly wider compared with the angle of view of the movie (DCR-DVD201 only).

•If you leave your camcorder powered by battery for 5 minutes, your camcorder automatically turns off. This is to save battery power and to prevent battery wear. Turn the power on again by pressing the POWER button for a few seconds. You can

cancel the automatic power-off by setting the (SETUP MENU) – [A.SHUT OFF] menu item to [NEVER] in the SETUP display.

•The image size is not displayed with the DCR-DVD101.

images movies/still Shooting

37