To remove the battery pack

1Set the POWER switch to OFF (CHG).

2Slide the battery pack out in the direction of the arrow while pressing the BATT (battery) release button down.

bNote

•If you do not use the battery pack for a long time, use up the battery pack completely before storing it. See page 83 about storage of the battery pack.

To check the remaining battery – Battery Info

You can check the battery’s current charge level and its current remaining recording time both during charging or when the power is turned off.

1Set the POWER switch to OFF (CHG).

2Open the LCD panel.

3Press DSPL/BATT INFO.

The battery information appears for about 7 seconds.

Keep the button pressed to view it for about 20 seconds.

ABattery charge level: Displays approximate remaining amount of power left in the battery pack.

BApproximate possible recording time using the LCD panel.

CApproximate possible recording time using the viewfinder.

Charging time

Approximate number of minutes required when you fully charge a fully discharged battery pack at 25°C (77°F). (10 – 30°C (50 – 86°F) recommended.)

Recording time when recording with the LCD screen on

Approximate number of minutes available when you use a fully charged battery pack at 25°C (77°F).

When LCD BACKLIGHT is set to ON

started Getting

Getting started 13