choosing the recording date on the screen. ([CM SEARCH] is set to [ON] by default).
When you are using a cassette that does not have Cassette Memory, your camcorder searches the still image automatically regardless of the recording date.
SEARCH M.
. / >
STOP
1 Slide the POWER switch repeatedly to select the PLAY/EDIT mode.
2 Press SEARCH M. on the Remote Commander repeatedly to select [PHOTO SEARCH].
3 Press . (previous)/> (next) on the Remote Commander to select the date or photo for playback.
When your cassette has Cassette Memory, you can select the recorded date.
When your cassette does not have Cassette Memory, your camcorder selects the still image before and behind the current point of the tape.
Playback of the photo starts automatically at the selected scene.
To cancel the operation
Press STOP on the Remote Commander.
bNote
•Photo search will not function correctly when there is a blank section between recorded sections on the tape.
You can also locate still images one after another and display each images for 5 seconds automatically.
SEARCH M.
. / >
STOP
1 Slide the POWER switch repeatedly to select the PLAY/EDIT mode.
2 Press SEARCH M. on the Remote Commander repeatedly to select [PHOTO SCAN].
3 Press . (previous)/> (next) on the Remote Commander.
Each photo will be played back for about 5 seconds.
To cancel the operation
Press STOP on the Remote Commander.
bNote
•Photo scan will not function correctly when there is a blank section between recorded sections on the tape.
42Playback