The starting point of the first program is set, and the upper part of the program mark changes to light blue.

V I DEO ED I T

0:08:55:06

 

 

 

 

 

 

 

MARK

 

START

 

ED I T

 

UNDO

OUT

 

 

 

SET

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TOTAL 0:00:00:00

SCENE 0

END

7 Search for the end of the first scene that you want to record on your camcorder, then pause playback.

You can adjust the position with / (frame).

8 Touch [MARK OUT].

The ending point of the first program is set, and the lower part of the program mark changes to light blue.

9 Repeat steps 5 to 8 and create programs.

10Set your VCR to recording pause.

Skip this step if your camcorder is connected via an i.LINK cable.

11Touch [START].

12Touch [EXEC].

A search for the beginning of the first program starts, then the recording starts.

[SEARCH] appears during the search and [EDITING] appears during editing.

When a program is recorded, the program mark stops flashing and remains lit. When all programs have been recorded, the program editing operation stops automatically.

To cancel recording, touch [CANCEL].

To end Digital program editing

Touch [ END].

To save a program without using it to record

Touch [ END] in step 9.

The program is stored in memory until the cassette is ejected.

To erase programs

1Follow steps 1 to 4 in “Recording the selected scenes as programs” (p. 67), then touch [UNDO].

2Touch [ERASE 1MARK] to delete the last set program. Or, touch [ERASE ALL] to delete all the programs.

3Touch [EXEC].

The programs are deleted.

To cancel this operation, touch [CANCEL].

bNotes

•You cannot set the starting point or ending point on a blank section of the tape. If there is a blank section, the total time may not appear correctly.

•When you cannot operate the device correctly using an i.LINK cable connection, select [IR] in step 9 on page 64, and set the [IR SETUP] code.

68Dubbing/Editing