Sony DCR-HC20 Recording the selected scenes as programs

synchronization is recorded. [COMPLETE] appears when the recording is finished.

V I DEO ED I T			END
	ED I T SET
	CONTROL	COMPLETE
	ADJ TEST
	”CUT - I N”
	”CUT -OUT”
	I R SETUP
	PAUSEMODE
	I R TEST
		EXEC	RET.

5 Rewind the tape on your VCR, then play back in slow mode.

5 opening numbers for each [IN] and closing numbers for each [OUT] appear.

6 Take a note of the opening number value of each [IN] and the closing number value of each [OUT], then calculate the average number value for each [IN] and [OUT].

7 Select [”CUT-IN”] with / , then touch [EXEC].

V I DEO ED I T				END
	ED I T SET
	CONTROL
	ADJ TEST
	”CUT - I N”		0
	”CUT -OUT”
	I R SETUP
	PAUSEMODE
	I R TEST
		EXEC		RET.

8 Touch / to select the average number value for [IN], then touch [EXEC].

The calculated start position for recording is set.

9 Select [”CUT-OUT”] with / , then touch [EXEC].

V I DEO ED I T				END
	ED I T SET
	CONTROL
	ADJ TEST
	”CUT - I N”
	”CUT -OUT”		0
	I R SETUP
	PAUSEMODE
	I R TEST
		EXEC		RET.

10Touch / to select the average number value for [OUT], then touch [EXEC].

The calculated stop position for recording is set.

11Touch [ END], then touch .

Recording the selected scenes as programs

When you are performing Digital program editing for the first time to a tape in a VCR, go through the procedures described in Steps 1 and 2 (p. 64 - p. 66) beforehand.

1	Prepare a cassette.
						Dubbing/Editing
	Insert a tape to be played back into the
	camcorder, then insert a cassette for
	recording into your VCR.
2	Touch		to display [PAGE1].
3	Touch MENU.
4	Select	(OTHERS), then select
	[VIDEO EDIT] with			/	,
	then touch [EXEC].
5	Search for the beginning of the first
	scene that you want to dub on your
	camcorder, then pause playback.
	You can adjust the position with				/
	(frame).
6	Touch [MARK IN].

,continued

Dubbing/Editing 67