ON (

)

Select to record pictures using frame recording.

1Select [ON], then touch [EXEC].

2Touch .

3Press REC START/STOP.

A picture (approximately 6 frames) is recorded, and your camcorder enters the standby mode.

4Move the subject and repeat step 3.

bNotes

•When you use frame recording continuously, the remaining tape time will not be indicated correctly.

•The last scene will be longer than other scenes.

INT.REC

You can record pictures on the tape at a selected interval.

You can achieve excellent recordings of flowers blooming, etc. with this function. Connect your camcorder to the wall outlet using the supplied AC Adaptor during the operation.

[a][a]

[b] [b]

a. [REC TIME] b. [INTERVAL]

1Select [SET], then touch [EXEC].

2Select [INTERVAL], then touch [EXEC].

3Select a desired interval time (30 seconds, 1, 5, 10 minutes), then touch [EXEC].

4Select [REC TIME], then touch [EXEC].

5Select a desired recording time (0.5, 1, 1.5, 2 seconds), then touch [EXEC].

6Touch [RET.].

7Select [ON], then touch [EXEC].

8Touch . flashes.

9Press REC START/STOP.

Interval recording starts.

lights up on the screen during Interval recording.

To cancel Interval recording, set to [OFF], then touch [EXEC] in the menu settings.

bNote

• There may be a discrepancy in recording time of up to ± 6 frames from the selected time.

56Customizing Your Camcorder