Dubbing selected scenes from a tape

– Digital program editing

You can select up to 20 scenes (programs) and record them in the desired order to other recording device such as VCRs.

Step 1: Preparing your camcorder and VCR for operation

Follow the steps below when you are performing Digital program editing for the first time to a tape in a VCR. You can skip this setting if you have set up the VCR by the following procedure before.

bNotes

•You cannot perform Digital program editing on a VCR that does not support [IR SETUP] codes.

•The operating signal for Digital program editing cannot be transferred via the LANC jack.

•When your camcorder is connected to the VCR via

the DV Interface, you cannot record the title, indicators, information for the Cassette Memory.

1 Connect your VCR to the camcorder as a recording device (p. 62).

You can use either the A/V connecting cable or the i.LINK cable to make the connection. The dubbing procedure is easier with the i.LINK connection.

2 Prepare your VCR.

•Insert a cassette for recording.

•Set the input selector to input mode if your VCR has one.

3 Prepare your camcorder (playing device).

•Insert a cassette for editing.

•Slide the POWER switch repeatedly to select the PLAY/EDIT mode.

4

Touch

to display [PAGE1].

 

 

 

 

 

5

Touch MENU.

 

 

 

 

 

6

Select

(OTHERS), then select

 

[VIDEO EDIT] with

/

,

 

then touch [EXEC].

 

 

 

 

 

 

7

Touch [EDIT SET].

 

 

8 Select [CONTROL] with

/

,

then touch [EXEC].

 

 

9 Select i.LINK or [IR].

When connecting with an i.LINK cable

Select i.LINK with / , then [EXEC]. Go on to “Step 2: Adjusting the synchronization of the VCR” (p. 66).

When connecting with an A/V connecting cable

64Dubbing/Editing