Recording stillimages – Tape photo recording

You can record still images. Before recording, follow steps 1 to 7 in “Getting started” (p. 11 - p. 20).

PHOTO

LENS COVER switch

POWER switch

1 Set the LENS COVER switch to OPEN.

2 Open the LCD panel.

3 Slide the POWER switch until the CAMERA lamp lights up.

4 Press and hold PHOTO lightly.

You will hear a light beep sound and the picture becomes a still image. Recording does not start at this point.

5 Press PHOTO fully.

A shutter sound is heard, and the image is recorded with sound for 7 seconds.

The still image is displayed on the screen until recording is completed.

To turn the power off

Slide the POWER switch up to OFF (CHG), then set the LENS COVER switch to CLOSE.

bNote

•appears when the tape photo recording does not work.

zTips

•You can record about 510 images in the SP mode and about 765 images in the LP mode on a 60 minutes tape.

•You can record still images using the self-timer recording (p. 23).

24Recording