For copying and viewing pictures recorded on a tape
–[USB Composite Device] in the [Universal Serial Bus Controller] folder
–[USB Audio Device] in the [Sound, video and game controller] folder
–[Composite USB Device] in the [Other devices] folder
5When the [Confirm Device Removal] screen appears, click [OK].
6Turn off the power of your camcorder, disconnect the USB cable, then restart the computer.
7Place the supplied
8Follow the steps below and try to install the USB driver again. 1
2
*Drive names (such as (E:)) may vary depending on the computer.
3 Click [Open].
4
5
•Deleting anything other than [USB Composite Device], [USB Audio Device] and [Composite USB Device] may cause a malfunction of your computer.
For Windows XP
Log on as Administrator.
1 Check that your camcorder is connected to a computer.
2 Click [Start].
3
4 Click and choose the [Hardware] tab [Device Manager] [View] [Devices by type].
5 If the devices below are already installed,
For copying and viewing pictures recorded on a tape
– [USB Composite Device] in the [Universal Serial Bus Controller] folder
– [USB Audio Device] in the [Sound, video and game controller] folder
– [USB Device] in the [Other devices] folder
6 When the [Confirm Device Removal] screen appears, click [OK].
7 Turn off the power of your camcorder, disconnect the USB cable, then restart the computer.
8 Place the supplied
9 Follow the steps below and try to install the USB driver again. 1
2
* Drive names (such as (E:)) may vary depending on the computer. 3 Click [Open].
4
5
72