•For
The 
DV Interface of your camcorder is designed for input/output use.
When your TV is monaural (When your TV has only one audio input jack)
Connect the yellow plug of the A/V connecting cable to the video input jack and connect the white (left channel) or the red (right channel) plug to the audio input jack of your TV or VCR.
•When you connect a device via an A/V connecting cable (supplied), set [DISP OUT] to [LCD] (the default setting) (p. 46) to prevent the screen display dubbed with pictures.
•For
You can also connect the A/V connecting cable to the A/V OUT jack of your camcorder (p. 52), but do not connect the A/V connecting cables to both your camcorder and the Handycam Station at the same time. The image might be distorted.
Dubbing to other recording devices
You can copy the picture played back on your camcorder to other recording devices (such as VCRs).
1Connect your VCR to your camcorder as a recording device.
See page 47 for details of connecting.
•When using an A/V connecting cable, connect to the input jack of the other device.
2Prepare your VCR for recording.
When dubbing to the VCR, insert a cassette for recording.
When dubbing to the DVD recorder, insert a DVD for recording.
If your recording device has an input selector, set it to the input mode.
3Prepare your camcorder for playback.
Insert the recorded cassette.
Slide the POWER switch down to turn on the PLAY/EDIT lamp.
4Start the playback on your camcorder, and record it on the VCR.
Refer to the operating instructions supplied with your recording device for details.
5When the dubbing is finished, stop your camcorder and the VCR.
48
• When you connect a device via an A/V connecting cable (supplied), set [DISP OUT] to [LCD] (the default setting) (p. 46) to prevent