![](/images/backgrounds/209735/209735-9274x1.png)
Warning indicators and messages
If indicators appear on the LCD screen or in the viewfinder, check the following. Some symptoms you can fix by yourself. If the problem persists even after you have tried a couple of times, contact your Sony dealer or local authorized Sony service facility.
C:(or E:) :
C:04:
•The battery pack is not an “InfoLITHIUM” battery pack. Use an “InfoLITHIUM” battery pack (p. 78).
C:21:
•Moisture condensation has occurred. Remove the cassette and leave your camcorder for at least 1 hour, then re- insert the cassette (p. 81).
C:22:
•Clean the head using a cleaning cassette (optional) (p. 82).
C:31: / C:32:
•Symptoms that are not described above have occurred. Remove and insert the cassette, then operate your camcorder again. Do not perform this procedure if moisture starts to condense (p. 81).
•Remove the power source. Reconnect it again and operate your camcorder again.
•Change the cassette. Press RESET (p. 23), and operate your camcorder again.
E:61: / E:62:
•Contact your Sony dealer or local authorized Sony service facility. Inform them of the
(Battery level warning)
| • The battery pack is nearly used up. |
74 | • Depending on the operating, |
|
environment, or battery conditions,
may flash, even if there are approximately 5 to 10 minutes remaining.
(Moisture condensation warning)*
•Eject the cassette, remove the power source, and then leave it for about 1 hour with the cassette lid open (p. 81).
(Warning indicators pertaining to the tape)
Slow flashing:
•There is less than 5 minutes remaining on the tape.
•No cassette is inserted.*
•The
Fast flashing:
• The tape has run out.*
(Eject cassette warning)*
Slow flashing:
•The
Fast flashing:
•Moisture condensation has occurred (p. 81).
•The
(Warning indicator pertaining to the external flash)
Slow flashing:
• Still charging
Fast flashing:
•The
•There is something wrong with the flash.