the screen display dubbed with pictures.
•To record the date/time and camera settings data by using the A/V connecting cable, display them on the screen (p. 36).
•The following cannot be output via the 
DV interface:
–Titles that are recorded on other camcorder.
–Indicators
–[P EFFECT]
•When connected using an i.LINK cable, the recorded picture becomes rough when a picture is paused on your camcorder while recording to a VCR.
You can record pictures from a VCR on a tape. Insert a cassette for recording in your camcorder beforehand.
1Connect your VCR to your camcorder.
Use an i.LINK cable to connect.
See page 47 for details of connecting.
•The 
indicator appears when you connect your camcorder and other devices via an i.LINK cable.
2Slide the POWER switch down to turn on the PLAY/EDIT lamp.
3Set your camcorder to recording pause mode.
Touch 
[PAGE3][REC CTRL][REC PAUSE].
4Start playing the cassette on your VCR.
The picture played on the connected device appears on the LCD screen of your camcorder.
5Touch [REC START] at the point you want to start recording.
6 Touch 
(stop).
7 Touch [
RET.] 
.
Dubbing/Editing
49