Battery pack

LCD panel

LCD panel

opened

closed

 

NP-FP90

500

620

 

 

 

On the battery pack

•Before changing the battery pack, slide the POWER switch up to OFF (CHG).

•The CHG (charge) lamp flashes during charging, or the battery information (p. 23) will not be correctly displayed under the following conditions.

–The battery pack is not attached correctly.

–The battery pack is damaged.

–The battery pack is fully discharged. (For Battery Info only.)

•The power will not be supplied from the battery as long as the AC Adaptor is connected to the DC IN jack of your camcorder or

the Handycam Station supplied with the DCR-HC22E, even when the mains lead is disconnected from the wall socket.

On the charging/recording/playback time

•The recording and playback time will be shorter when you use your camcorder in low temperatures.

•The recording and playback time will be shorter depending on the conditions under which you use your camcorder.

•Times measured with the camcorder at 25°C (77°F). (10 - 30 °C (50 - 86°F) is recommended.)

On the AC Adaptor

•Use the nearby wall socket when using the AC Adaptor. Disconnect the AC Adaptor from the wall socket immediately if any malfunction occurs while using your camcorder.

•Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.

•Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This may cause a malfunction.

PRECAUTION

•Even if your camcorder is turned off, AC power (mains) is still supplied to it while connected to the wall socket via the AC Adaptor.

12