3 Lightly push the cassette compartment in with the cassette lid.
The cassette compartment automatically slides back in.
4 | Close the cassette lid. |
To eject the cassette | |
1 | Slide the OPEN/EJECT lever and open |
the cassette lid.
The cassette compartment automatically comes out.
2Take out the cassette.
3Lightly push the cassette compartment in with the cassette lid.
The cassette compartment automatically slides back in.
4Close the cassette lid.
Inserting a “Memory Stick Duo”
For details on the “Memory Stick Duo,” see page 97.
bNote
•You can use only a “Memory Stick Duo,” which is about half the size of an ordinary “Memory Stick,” in your camcorder (p. 97). Do not try to force any
other type of “Memory Stick” into the “Memory Stick” slot.
Access lamp |
| |
b mark |
| |
Insert the “Memory Stick Duo” with the b |
| |
mark in the bottom left corner facing | Getting | |
down until it clicks. | ||
started | ||
To eject a “Memory Stick Duo” | ||
| ||
Lightly push the “Memory Stick Duo” in once. |
|
Lightly push in once.
bNotes
•If you force the “Memory Stick Duo” into the “Memory Stick” slot in the wrong direction, the “Memory Stick” slot may be damaged.
•Do not insert anything other than a “Memory Stick Duo” into the “Memory Stick” slot. Doing so may cause a malfunction of your camcorder.
•When the access lamp is lit or flashing, your camcorder is reading/writing data from/to the “Memory Stick Duo.” Do not shake or knock your camcorder, turn the power off, eject the “Memory Stick Duo,” or remove the battery pack. Otherwise, image data may be damaged.
Getting started 19