![](/images/backgrounds/209423/209423-11628x1.png)
To cancel the
Follow steps 1 and 2, then select [OFF] in step 3.
Recording a still image on a “Memory Stick Duo” while recording movies on a tape
The image size is set to [640 × 480]. If you want to record a still image in a different size, use the Memory photo recording function (p. 25).
PHOTO
Press PHOTO fully during recording.
|
| 60min | REC 0:00:10 |
| Recording is complete | |||
|
|
|
|
|
|
|
| when the scrolling |
|
|
|
|
|
|
|
| stops. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To record still images in standby mode
Press and hold PHOTO lightly. Check the image, then press PHOTO fully.
bNotes
•You cannot record a still image on a “Memory Stick Duo” during the following operations:
–FADER
–[16:9 WIDE] mode
–Memory overlap
–MEMORY MIX
•Titles are not recorded on a “Memory Stick Duo.”
Adjusting the exposure
The exposure is adjusted automatically in the default setting.
Adjusting the exposure for backlit subjects
When your subject has its back to the sun or other light, you can adjust the exposure to prevent the subject from becoming shadowed.
BACK LIGHT
Press BACK LIGHT during recording or in the standby mode.
.appears.
To cancel the back light function, press BACK LIGHT again.
bNote
•The back light function is canceled when you set [SPOT METER] (p. 28) or [EXPOSURE] to [MANUAL] (p. 29).
Fixing the exposure for the selected subject
— Flexible spot meter
You can adjust and fix the exposure to the subject, so that it is recorded in suitable brightness even when there is strong contrast
28Recording