MENU, then select it from the (PICT. APPLI.) menu.

60min

STBY 0:00:00

FADER:

OFF

OFF NORMAL

FADER

MOSAIC MONO-

FADER TONE

4 Touch the desired effect, then touch

.

60min

STBY 0:00:00

NORMAL

FADER

P-MENU

5 Press START/STOP.

The fader indicator stops flashing and stays lit up, then disappears when the fade is complete.

1Check that you have a “Memory Stick Duo” with the still image to be superimposed and a tape in your camcorder.

2Slide the POWER switch to select the CAMERA-TAPE mode.

3Touch .

4Touch MENU.

5Select the (PICT.APPLI.) menu,

then [ OVERLAP] using / ,

then touch .

The recorded still image on the “Memory Stick Duo” appears on the thumbnail screen.

6Touch (previous) / (next) to select the still image to be superimposed.

7Touch [ON], then .

8Touch .

9Press START/STOP to start recording. The [M.OVRLAP] indicator stops flashing and stays lit up, then disappears when fade is completed.

Recording

To cancel the FADER

Follow steps 2 and 3, then touch [OFF] in step 4.

bNote

•You cannot use FADER together with:

–Color Slow Shutter

–Digital effect

zTip

•You can also select the fade-in effect while recording. When you stop the recording, the screen turns blue to store its last image, from which you can fade into the continuing recording.

Fading in from a still image on the “Memory Stick Duo” — Memory overlap

You can fade in from the still image on the “Memory Stick Duo” to the movie currently being recorded on the tape.

Still image

 

 

Movie

 

 

 

 

 

 

 

 

 

 

Using special effects

— Digital effect

You can add digital effects to the recordings.

[STILL] (still)

You can record a movie superimposing it on a previously recorded still image.

[FLASH] (flash motion)

You can record a movie with a serial-still-image effect (Strobe effect).

[LUMI.KEY] (luminance key)

You can replace a brighter area in a previously recorded still image, such as the background of

,continued

Recording 33